Product Description
HIGUARD CLEAR LACQUER 60% 4 Litre Can
Product ID
HG4.60
Description:
A premium quality high build pre-catalysed clear lacquer formulated for outstanding hardness and excellent mar resistance. When fully cured it provides good alcohol, heat and water resistance, and is very durable. Available in a range of gloss levels (full gloss, 60%, 30%, and 10% gloss).
Properties:
- Long Lasting
- Heat Resistant
- Alchol Resistant
- Water Resistant
- -
- -
Use:
Formulated for quality interior timber furniture, bookshelves, entertainment units, tables, wall panelling, doors, kitchen cupboards and cabinets, desks and chairs etc. Suitable for most timbers and veneers. Not designed for exterior use or for continually wet and heavy work areas.
Application:
By conventional and airless spray equipment. HiGard Lacquer is normally supplied ready for use and does not require thinning. However, if thinning is desired use up to 10% by volume HiChem Reducer 285 to ensure good flow characteristics. When a slower rate of evaporation is required use up to 10% by volume Retarder. For example use Retarder in very high temperatures and high humidity and where open grained timber results in craters or pinholes. After application of stain and sanding sealer , sand smooth with 400 grit paper, and apply 2-3 coats of HiGard with a flash off time of 5 minutes between coats. Avoid heavy application as this may lead to recoat problems during repair or touchup. HiGard Lacquer is an excellent sealer in itsÂ’ own right and can be used as a total system of 2-3 coats with sanding between coats using 400 grit free-cut paper. For fast turnover HiGard may be applied alone in three coats wet on wet with approx. 5 minutes flash off between coats. Toning - use maximum of 10% by volume HiChem Spirit Stain in HiGard. Tone sparingly as Toning may lead to heavy film build and its associated problems.
Coverage:
Approx. 10 square metres per litre at dry film thickness of 25 micron.