Product Description
PANEL FLECK Beige 1 Litre Can (no Label)
Product ID
PFB1
Description:
A tough durable multi-coloured textured coating suitable for use on a variety of surfaces. It is available in grey or beige.
***Please note*** this can is sold without any labels or instructions on can
Properties:
- Excellent adhesion to correctly prepared surfaces
- Good filling qualities
- Tough , hard wearing surface, abrasion resistant.
- Quick drying
Use:
The textured granite fleck effect hides minor imperfections, provides and ideal coating for cargo areas of utes, trucks, boats and a variety of decorative panels. May be used over a variety of correctly prepared surfaces such as ferrous metals, non-ferrous metals, plastics, fibreglass, wood, ceramic, and glass. For improved chemical (eg petrol) resistance apply a suitable clearcoat.
Application:
DO NOT STIR Panel Fleck. To ensure uniform mixing turn the can upside down several times while shaking gently. Alternatively pour contents from one container to another three or four times. Apply by gravity feed spray putty type gun with a spray aperture of 2.8-3.00mm. (a) Adjust air regulator to 275-340kpa (40-50psi). Fully open the product supply passage and also the fan. Spray the initial base coat with little or no fleck. (b) Now adjust the air regulator to between 70-140kpa (10-20psi) and recoat with a fleck pattern. A spotted pattern is achieved by spraying perpendicular to the surface. For a more elongated and streaky pattern spray at an angle to the surface. The size of the pattern may be reduced by increasing the air pressure at the regulator. Spray a test panel, adjusting the spray gun until the desired pattern is achieved. For a high gloss finish and added protection( eg for petrol resistance) you may apply Motospray 2 Pack Clear, Express Clear, Iso Free Acrylic Clear or Acrylic Top Coat Clear. Allow Panel Fleck to dry hard (7-10 days) before application of clear coat.
Coverage:
Coverage 3 square metres per litre (200micron)