Product Description
SELLEYS 675 Crystal Fix Clear 290ml Cartridge
Our SELLEYS Adhesive & Silicones are 100% Fresh and in-date (fully compliant)
Description
Based on advanced hybrid technology, this multipurpose crystal clear elastic adhesive sealant is design for where an invisible bond is necessary.
Recommended Uses
- Selleys 675 Crystal Fix is suitable for both bonding and sealing applications
- House interior fitting
- Construction finishing
- Furniture and industrial assembly where a crystal-clear bond or seal is required
- Suitable for transparent bridge and balcony parapets
- Weatherproofing of joints in transparent roof coverings
- Joints between window or door frames
- Mirror and glass assembly
Features
- 100% clear finish
- 240t/m2 end strength
- Sales & bonds to any building material, wet or dry
- High flexibility with ±20% joint movement capability
- Fast cure, adjustable for 10 minutes
- Broad primer less adhesion on most building materials
- Bonds and seals at the same time
- Excellent resistance to ageing and weathering; colour stable, non-yellowing and non-chalking
- No shrinkage during curing
- Environmentally friendly – Free of isocyanates and solvents
- Low VOC (Meets GBCA VOC Content Requirement <50g/L)
Technical Details
|
Appearance
|
Smooth paste |
|
Technology
|
Hybrid Polymer |
|
Skin Time
|
15–20 minutes |
|
Cure Time
|
3-5 days (full cure) |
|
Movement Capability
|
±20% |
|
Paintability
|
Yes (after curing) |
|
UV Resistance
|
Yes |
|
Application Temperature Range
|
5°C to 40°C |
|
Service Temperature Range
|
-40°C to 150°C |
|
Suitable Substrates
|
Concrete Aluminium Glass Masonry |
|
Clean Up
|
Before cure: damp cloth; After cure: mechanically remove
|
Directions for use
- Surface must be clean, dry, and free from contaminants.
- Use caulking gun and apply evenly to prepared joints.
- Smooth and tool off before skin forms.
- Avoid water exposure until fully cured.
- Cure time may vary depending on joint depth and conditions.
Limitations
- Not for structural glazing or continuous water immersion
- Avoid application below 5°C or above 40°C
- Not recommended for use on bituminous substrates


