Product Description
12 x ENAMEL PRIMER SURFACER 1 LITRE CANS
Product ID
EPSG1
FREE SHIPPING
12 x 1 Litre cans of EPSG1 - HiChem Enamel Surfacer Primer Grey
Description:
An automotive grade product, designed for use under HiChem Automotive & Agricultural Enamel topcoats.
Properties:
- Excellent adhesion to correctly prepared surfaces
- Good filling qualities
- Smooth lay down properties
- Quick drying
- Easy to sand
- Excellent hold out
Use:
May be applied over previously painted surfaces (in good condition), bare steel, fibreglass, polyester fillers, and Super Etch Primer. Suitable under Quick Drying Enamel, QD601 Super Enamel and Automotive & Agricultural Enamel.
Application:
Spray 2 to 3 coats with 10 minutes drying time between coats. Before application of topcoat, allow a minimum 6 hours drying time at 20?C. At higher film builds and/or lower temperatures, overnight drying is recommended. Dry sand with 400 grit paper or wet sand with WD 360 paper.
Coverage:
Approximately 16m2/Ltr at dry film thickness of 25 micron.
